Normally the electroplating color could last at least 1-2 years, but the actual situation would depend on how you keep and use the product. (i.e. exposure to sun and humidity are both the possible fac...

The silkscreen process offers the best solution for your pin when your designs require precise, color-on-color detailing. Generally speaking, silkscreen printing is also named as solid color printing ...

There are stamped iron with soft enamel/ stamped brass with soft enamel/ photo etched brass with soft enamel/ die cast zinc alloy or spin cast pewter with soft enamel, a lot of procedures or materials...

Imitation hard enamel is invented in early 1990 and also named Soft cloisonne or synthetic cloisonne. It would be filled into the stamped metal first, and have polishing and electroplating afterwards....

We’ll prepare film which has your design already and then transfer your design from film onto a sheet of brass. Your design would be etched by acid chemical, and then we’ll have the brass with elect...

Die casting is a metal casting process that is characterized by forcing molten metal under high pressure into a mold cavity. Once the mold cavity is filled, the pressure is maintained until the castin...

The CMYK printing is based on 4 colors of reference: Cyan, Magenta, Yellow, and Black. But the high definition of this process relies on the fact that these 4 colors are printed on a “white” backgro...

Similarly to iron, Stainless Steel is a very dense material. When stamped, Stainless Steel might damage the mould. Furthermore, stamping Stainless Steel often results in a high default rate. Deformati...